S-Power provide a low power easy to inter¬face RS¬232 to Wifi module.
The embedded system will take care of all the Wifi stack and MAC stack, and consume almost no resources from the interface embedded system.
The module is IEEE 802.11b/g/n compatible with 1Mbps highest rate, and support extensive security protocol.
The module is CE, and FCC certified with embedded chip antenna option.

Wifi Module with Serial Interface


Part No Supply Voltage Radio I/O interface Networking Protocols Security Protocols Frequency Power consumption Power Down Min. start up delay Max. Rate (Bit) Package
BG1WizFi210 3.3V IEE 802.11 b/g/n UART, SPI, I2C, WAKE, ALARM, GPIO UDP, TCP/IP(IPv4), DHCP, ARP, DNS, HTTP/HTTPs Client and Server WEP, WPA/WPA2-PS, Enterprise (EAP-FAST,EAP-TLS,EAP-TTLS,PEAP) 2.4~2.497GHz 34uA @ Standby
125mA@Receive
135mA@Transmit
0.01uA 20ms 1Mbps @ IEEE 802.11b 32×23.5×3mm SIP